Search found 1124 matches

by autelis
Mon Oct 16, 2017 4:24 pm
Forum: Pool Control for Pentair Intellitouch/Easytouch/Suntouch
Topic: Problems with autelis "freezing"
Replies: 8
Views: 4277

Re: Problems with autelis "freezing"

Thanks for your post. Querying the device should not cause this issue. Are you running version 1.6.7?

What is the value of runstate in status.xml during this freeze state?
by autelis
Fri Oct 13, 2017 3:04 pm
Forum: Pool Control for Jandy/Zodiac
Topic: "poolht" and "spaht" Never Report On Status (Value 2)
Replies: 17
Views: 8998

Re: "poolht" and "spaht" Never Report On Status (Value 2)

Yes it should update between 1 and 2. There is no log and no recent changes related to heater status.
by autelis
Thu Oct 12, 2017 4:47 pm
Forum: Pool Control for Jandy/Zodiac
Topic: "poolht" and "spaht" Never Report On Status (Value 2)
Replies: 17
Views: 8998

Re: "poolht" and "spaht" Never Report On Status (Value 2)

The only other report of heater status problems we have seen was with a dual heater setup. We are unable to reproduce but we do not have rev JJ for testing.
by autelis
Wed Oct 11, 2017 4:33 pm
Forum: Pool Control for Jandy/Zodiac
Topic: "poolht" and "spaht" Never Report On Status (Value 2)
Replies: 17
Views: 8998

Re: "poolht" and "spaht" Never Report On Status (Value 2)

Can you please post your Jandy firmware version and if you have a shared heater or dual heaters.
by autelis
Fri Oct 06, 2017 1:51 pm
Forum: Pool Control for Pentair Intellitouch/Easytouch/Suntouch
Topic: TCP Serial Port firmware
Replies: 16
Views: 11275

Re: TCP Serial Port firmware

Yes it appears your code opens a TCPSerial connection to enable UDP anyway so it could just leave that open and connect it to the parse callback. If you add some auto reconnect logic for any timeouts or disconnections it should be ok. Thanks for your efforts.
by autelis
Wed Oct 04, 2017 12:21 pm
Forum: Pool Control for Jandy/Zodiac
Topic: Consecutive calls to set.cgi in HTTP Command Interface
Replies: 1
Views: 2156

Re: Consecutive calls to set.cgi in HTTP Command Interface

Thanks for your post. We will investigate this issue.
by autelis
Wed Oct 04, 2017 12:20 pm
Forum: Pool Control for Pentair Intellitouch/Easytouch/Suntouch
Topic: TCP Serial Port firmware
Replies: 16
Views: 11275

Re: TCP Serial Port firmware

Thanks for posting. Are you able to listen on a TCP connection for the realtime updates from TCPSerial or do you require UDP protocol? The original reason for UDP broadcast was specifically for multiple clients.
by autelis
Tue Oct 03, 2017 2:13 pm
Forum: Pool Control for Pentair Intellitouch/Easytouch/Suntouch
Topic: TCP Serial Port firmware
Replies: 16
Views: 11275

Re: TCP Serial Port firmware

Thanks for your post. No this feature is not available on Pentair at this time.
by autelis
Mon Sep 25, 2017 11:38 am
Forum: Pool Control for Pentair Intelliflo
Topic: DISPLAY Not Active!
Replies: 3
Views: 6558

Re: DISPLAY Not Active!

Thanks for the information. This sounds like your Autelis device is able to send commands to the pump but is unable to receive the answers sent from the pump. Please double check the wiring.