1-Wire Temp Monitor

Post Reply
plr
Posts: 1
Joined: Fri Feb 15, 2013 5:18 pm

1-Wire Temp Monitor

Post by plr » Fri Feb 15, 2013 5:32 pm

Hello,

I'm interested in the Autelis 1-Wire Temp Monitor but it's missing one very important feature that I would need to complete my requirements, a relay that is activated when a high or low alarm is triggered. Is thee any locations internally that I can use to drive a transistor or trigger a SCR when an alarm condition is activated. It would be nice if you offered an external add on relay board that you could assign each temp sensor alarm to it's own relay. Please let me know if either way is possible. Thanks, Perry
autelis
Site Admin
Posts: 1111
Joined: Tue Nov 30, 2010 1:02 pm

Re: 1-Wire Temp Monitor

Post by autelis » Sat Feb 16, 2013 8:12 am

Thanks for your inquiry. We would be able to provide 3 common collector outputs. Please let us know if that would suit your needs and how you plan to trigger/use them. If you require a more complex setup let us know and we can look into it.

Thanks.
Autelis.com Staff
Post Reply