TCP Serial Port firmware

bgrubb1
Posts: 8
Joined: Thu Aug 20, 2015 3:14 pm

Re: TCP Serial Port firmware

Post by bgrubb1 » Sat Oct 21, 2017 6:49 pm

I have been trying to use the tcp firmware for intellibright light control
I can use the tcp firmware to turn on aux1 (light)
The “themes” all work (American, sunset, etc)
Individual colors (IB_BLUE, etc) all resort in red
Am using ISY network resources to do this. Have tried the max timeout of 20,000
Anything else I can try ?
..Barry
autelis
Site Admin
Posts: 1123
Joined: Tue Nov 30, 2010 1:02 pm

Re: TCP Serial Port firmware

Post by autelis » Mon Oct 23, 2017 4:44 pm

Are you able to use the color function through any other interface? Do you have intellitouch or easytouch?
Autelis.com Staff
bgrubb1
Posts: 8
Joined: Thu Aug 20, 2015 3:14 pm

Re: TCP Serial Port firmware

Post by bgrubb1 » Mon Oct 23, 2017 5:08 pm

Using Easytouch
I can change individual colors with http://192.168.1.163/lights.htm. (Easy touch at .163)
I can change individual colors with Pentair ScreenLogic
...Barry
autelis
Site Admin
Posts: 1123
Joined: Tue Nov 30, 2010 1:02 pm

Re: TCP Serial Port firmware

Post by autelis » Mon Oct 23, 2017 6:27 pm

Thanks for the information. We will check this. In the meantime you can use HTTP commands instead like http://poolcontrol/lights.cgi?val=blue

Also please verify your network resources are saved correctly if you used copy function to create them.
Autelis.com Staff
bgrubb1
Posts: 8
Joined: Thu Aug 20, 2015 3:14 pm

Re: TCP Serial Port firmware

Post by bgrubb1 » Tue Oct 24, 2017 4:32 pm

Confirmed saved correctly
toddimus
Posts: 4
Joined: Tue Oct 03, 2017 4:35 pm

Re: TCP Serial Port firmware

Post by toddimus » Mon Apr 08, 2019 10:21 am

Resurrecting this old thread...
I wanted to check on the state of affairs regarding this firmware for the Pentair Intellitouch TCP/UDP broadcast.
I wrote some code for OpenHAB that uses the status queries and get commands for setting new values. I had some trouble getting the native OpenHAB binding to work correctly so I decided to write my own OpenHAB rules to implement a custom solution.

I was hoping that there’s a way to have the Autelis make a broadcast for every change in value (except for time). That way I wouldn’t have to poll so frequently for updates. This was mentioned before in this thread and I’d like to reiterate this request.

Thanks!!
Post Reply