ISY/Vera Firmware device ID max not high enough

Post Reply
jlind
Posts: 5
Joined: Tue Aug 15, 2017 6:22 am

ISY/Vera Firmware device ID max not high enough

Post by jlind » Sun Aug 20, 2017 10:33 am

Hi,
I have the Vera Pentair plugin installed and kind of functioning. I'm trying to set my setting in the Autelis ISY/Vera firmware 1.6.7. Unfortunately, I can't save a number higher than 255 in the device number for Vera. My plugin device number in Vera is 392.

Thanks,

jlind
jlind
Posts: 5
Joined: Tue Aug 15, 2017 6:22 am

Re: ISY/Vera Firmware device ID max not high enough

Post by jlind » Tue Aug 29, 2017 3:00 pm

Although not a fix, I do have a workaround. You can modify the ID in Vera by using:

Code: Select all

luup.attr_set("id", "device_ID_you_want", currentID)
Make sure you don't use an ID that's currently being used. You need to do it before you add any child nodes.
autelis
Site Admin
Posts: 1123
Joined: Tue Nov 30, 2010 1:02 pm

Re: ISY/Vera Firmware device ID max not high enough

Post by autelis » Wed Aug 30, 2017 8:20 am

Thanks for reporting the issue and workaround. We will try to fix this in the next firmware update.
Autelis.com Staff
Post Reply