Power Issue

Post Reply
kandlg
Posts: 2
Joined: Thu Sep 18, 2014 5:54 pm

Power Issue

Post by kandlg » Thu Sep 18, 2014 6:04 pm

I've connected the Autelis controller to the Hayward system as described, but I don't get a green light so it doesn't look like it is powering up. I've measured the voltage across terminal 1 and 2 which correspond to the red and black wires as 8.35 volts DC. Are these terminals ( 1&2) the power connections for the device? Is this the correct voltage?
kandlg
Posts: 2
Joined: Thu Sep 18, 2014 5:54 pm

Re: Power Issue

Post by kandlg » Fri Sep 19, 2014 5:40 pm

I received a response from customer service and thought I would post for anyone else having trouble. The label on the case of my Autelis was incorrect. The correct wiring is:

Autelis Terminal 1 Red to Hayward Terminal 1 Red
Autelis Terminal 2 Green to Hayward Terminal 4 Green
Autelis Terminal 3 Yellow to Hayward Terminal 3 Yellow
Autelis Terminal 4 Black to Hayward Terminal 2 Black
Post Reply